SOBO WP Series Aquarium Energy Saving Low Noise, Pond and Fountain Aquarium Submersible Water Pump For Aquarium Fish Tank

Specification :

Model : WP-2200

Power : 35W

Voltage : 220V-240V

H.Max : 2.0M

Output : 2000L/H

Specification :

Model : WP-4200

Power : 55W

Voltage : 220V-240V

H.Max : 2.5M

Output : 3000L/H

CAUTION :

Always disconnect from the electrical socket before performing maintenance.

Alawys ensure the pump is submerged in water.

Do not lift the pump unit by pulling the wire (Power Cord).

The power supply cord provided for this appliance cannot be replaced.

PERFORMANCE :

A clogged or dirty intake screen will generally reduce the performance of the pump. Hence, you must wash away the surrounded debris frequently. If less flow is required, adjust the flow control lever.

MAINTENANCE :

Remove the front cover and the impeller cover, followed by the impeller unit. Use a small brush to clean the cylinder or just wash away the debris under running water.

REMINDER: If the pump fails to operate, check the following: Check and ensure there is a consistent power supply to the pump unit.

NOTE :

Performing regular maintenance can prolong the life span of the pump. During installation, ensure the power plug of the pump is inserted to the power socket outlet at the higher point. This is to ensure that water will not back flow via the wire to the socket outlet.

• Completely Submersible Motor.
• Extremely Quiet Operation.
• Suction Cups to Fit any Aquariums.
• Long Lasting Wear-proof Ceramic Shaft.
• Suitable for Fresh & Sea Salt Water Appliances.